You have no items in your shopping cart.
Cutting Discs & Accessories
115mm x 22.23mm Flap Disc
- For wood sanding finishing, rust & paint removal.
- Bore size: 115mm discs-22.23mm.
- 180mm discs-22.23mm.
£2.39
180mm x 22.23mm Flap Disc
- For wood sanding finishing, rust & paint removal.
- Bore size: 115mm discs-22.23mm.
- 180mm discs-22.23mm.
£3.59
Metal Cutting Disc (12")
- Blade Diameter – 12” (300mm x 20mmBore size).
- FOR USE ON PORTABLE ENGINE DRIVEN SAWS.
- Premium quality, fibreglass reinforced cutting discs for general metalworking use.
- Manufactured in compliance with EN12413 with two fibreglass reinforcements.
- Produced with high grade, highly refined aluminium oxide grit.
- Bonded with high quality 'bakelite' resin.
- Suitable for cutting most ferrous metals, such as iron and steel.
- MUST NOT BE USED ON NON-FERROUS METALS.
£2.08
Metal Cutting Disc (14")
- Blade Diameter – 14” (350mm x 25.4mmBore size).
- FOR USE IN BENCH MOUNTED CUT OFF SAW.
- Premium quality, fibreglass reinforced cutting discs for general metalworking use.
- Manufactured in compliance with EN12413 with two fibreglass reinforcements.
- Produced with high grade, highly refined aluminium oxide grit.
- Bonded with high quality 'bakelite' resin.
- Suitable for cutting most ferrous metals, such as iron and steel.
- MUST NOT BE USED ON NON-FERROUS METALS.
£3.06
Metal GRINDING Disc (4 1/2")
- Blade Diameter – 4 1/2” (115mm x 22.23mmBore size x 6mm Thick).
- FOR USE ON HAND HELD ANGLE GRINDERS.
- Premium quality, fibreglass reinforced GRINDING discs for general metalworking use.
- Manufactured in compliance with EN12413 with two fibreglass reinforcements.
- Produced with high grade, highly refined aluminium oxide grit.
- Bonded with high quality 'bakelite' resin.
- Suitable for GRINDING most ferrous metals, such as iron and steel.
- MUST NOT BE USED ON NON-FERROUS METALS.
£1.19
Metal GRINDING Disc (9")
- Blade Diameter – 9” (230mm x 22.23mmBore size x 6mm Thick).
- FOR USE ON HAND HELD ANGLE GRINDERS.
- Premium quality, fibreglass reinforced GRINDING discs for general metalworking use.
- Manufactured in compliance with EN12413 with two fibreglass reinforcements.
- Produced with high grade, highly refined aluminium oxide grit.
- Bonded with high quality 'bakelite' resin.
- Suitable for GRINDING most ferrous metals, such as iron and steel.
- MUST NOT BE USED ON NON-FERROUS METALS.
£2.04
Polycarbide 115mm x 22.23 Abrasive Disc
- Excellent for Removing Surface Paint and Rust. Use on Metal Paint Varnish Filler and Plastic.
£7.08
Stone Cutting Disc (12")
- Blade Diameter – 12” (300mm x 20mmBore size).
- FOR USE ON PORTABLE ENGINE DRIVEN SAWS.
- Premium quality, fibreglass reinforced cutting discs for general masonry use.
- Manufactured in compliance with EN12413 with two fibreglass reinforcements.
- Produced with high grade, highly refined silicon carbide grit.
- Bonded with high quality 'bakelite' resin.
- Suitable for cutting most masonry materials, including block, brick, concrete, stone, roof tiles etc.
- Also suitable for cutting many non-ferrous metals including copper, brass and aluminium.
£2.30
Stone Cutting Disc (4 1/2")
- Blade Diameter – 4 1/2” (115mm x 22.23mmBore size).
- FOR USE ON HAND HELD ANGLE.
- Premium quality, fibreglass reinforced cutting discs for general masonry use.
- Manufactured in compliance with EN12413 with two fibreglass reinforcements.
- Produced with high grade, highly refined silicon carbide grit.
- Bonded with high quality 'bakelite' resin.
- Suitable for cutting most masonry materials, including block, brick, concrete, stone, roof tiles etc.
- Also suitable for cutting many non-ferrous metals including copper, brass and aluminium.
£1.19
Stone Cutting Disc (9")
- Blade Diameter – 9” (230mm x 22.23mmBore size).
- FOR USE ON HAND HELD ANGLE GRINDERS.
- Premium quality, fibreglass reinforced cutting discs for general masonry use.
- Manufactured in compliance with EN12413 with two fibreglass reinforcements.
- Produced with high grade, highly refined silicon carbide grit.
- Bonded with high quality 'bakelite' resin.
- Suitable for cutting most masonry materials, including block, brick, concrete, stone, roof tiles etc.
- Also suitable for cutting many non-ferrous metals including copper, brass and aluminium.
£1.27
Thin Metal Cutting Disc (4 1/2")
- Blade Diameter – 4 1/2” (115mm x 22.23mmBore size x 1mm Thick).
- FOR USE ON HAND HELD ANGLE GRINDERS.
- Premium quality, fibreglass reinforced cutting discs for general metalworking use.
- Manufactured in compliance with EN12413 with two fibreglass reinforcements.
- Produced with high grade, highly refined aluminium oxide grit.
- Bonded with high quality 'bakelite' resin.
- Suitable for cutting most ferrous metals, such as iron and steel.
- MUST NOT BE USED ON NON-FERROUS METALS.
£0.66
Thin Metal Cutting Disc (9")
- Blade Diameter – 9” (230mm x 22.23mmBore size x 3mm Thick).
- FOR USE ON HAND HELD ANGLE GRINDERS.
- Premium quality, fibreglass reinforced cutting discs for general metalworking use.
- Manufactured in compliance with EN12413 with two fibreglass reinforcements.
- Produced with high grade, highly refined aluminium oxide grit.
- Bonded with high quality 'bakelite' resin.
- Suitable for cutting most ferrous metals, such as iron and steel.
- MUST NOT BE USED ON NON-FERROUS METALS.
£1.44
- 1
- 2