Push Fit Waste Pipe Fittings

View as Grid List
Sort by
Display per page

Knuckle Bend 90deg

  • PUSH-FIT (Ring Seal) JOINTING 1. Where plain end pipe is being used, ensure that the pipe is cut square to it’s axis and that all burrs are removed. 2. Chamfer the end of the pipe to prevent the ring seal being damaged or displaced when the pipe is inserted into the socket. Fittings with spigot ends are moulded with a chamfer during manufacture.3. Lubricate the spigot or ring seal with silicone grease or aerosol lubricant. 4. Insert the pipe or fitting into the socket and then withdraw it by approx. 10mm to allow for expansion of the pipework.

€1.60

Obtuse Bend 45deg

  • PUSH-FIT (Ring Seal) JOINTING 1. Where plain end pipe is being used, ensure that the pipe is cut square to it’s axis and that all burrs are removed. 2. Chamfer the end of the pipe to prevent the ring seal being damaged or displaced when the pipe is inserted into the socket. Fittings with spigot ends are moulded with a chamfer during manufacture.3. Lubricate the spigot or ring seal with silicone grease or aerosol lubricant. 4. Insert the pipe or fitting into the socket and then withdraw it by approx. 10mm to allow for expansion of the pipework.

€1.60

Pipe Clip

  • PUSH-FIT (Ring Seal) JOINTING 1. Where plain end pipe is being used, ensure that the pipe is cut square to it’s axis and that all burrs are removed. 2. Chamfer the end of the pipe to prevent the ring seal being damaged or displaced when the pipe is inserted into the socket. Fittings with spigot ends are moulded with a chamfer during manufacture.3. Lubricate the spigot or ring seal with silicone grease or aerosol lubricant. 4. Insert the pipe or fitting into the socket and then withdraw it by approx. 10mm to allow for expansion of the pipework.

€0.45

Reducer 40mm x 32mm

  • PUSH-FIT (Ring Seal) JOINTING 1. Where plain end pipe is being used, ensure that the pipe is cut square to it’s axis and that all burrs are removed. 2. Chamfer the end of the pipe to prevent the ring seal being damaged or displaced when the pipe is inserted into the socket. Fittings with spigot ends are moulded with a chamfer during manufacture.3. Lubricate the spigot or ring seal with silicone grease or aerosol lubricant. 4. Insert the pipe or fitting into the socket and then withdraw it by approx. 10mm to allow for expansion of the pipework.

€1.60

Screwed Access Plug

  • PUSH-FIT (Ring Seal) JOINTING 1. Where plain end pipe is being used, ensure that the pipe is cut square to it’s axis and that all burrs are removed. 2. Chamfer the end of the pipe to prevent the ring seal being damaged or displaced when the pipe is inserted into the socket. Fittings with spigot ends are moulded with a chamfer during manufacture.3. Lubricate the spigot or ring seal with silicone grease or aerosol lubricant. 4. Insert the pipe or fitting into the socket and then withdraw it by approx. 10mm to allow for expansion of the pipework.

€1.84

Soil Boss Bend 157deg

  • PUSH-FIT (Ring Seal) JOINTING 1. Where plain end pipe is being used, ensure that the pipe is cut square to it’s axis and that all burrs are removed. 2. Chamfer the end of the pipe to prevent the ring seal being damaged or displaced when the pipe is inserted into the socket. Fittings with spigot ends are moulded with a chamfer during manufacture.3. Lubricate the spigot or ring seal with silicone grease or aerosol lubricant. 4. Insert the pipe or fitting into the socket and then withdraw it by approx. 10mm to allow for expansion of the pipework.

€1.96

Straight Coupling

  • PUSH-FIT (Ring Seal) JOINTING 1. Where plain end pipe is being used, ensure that the pipe is cut square to it’s axis and that all burrs are removed. 2. Chamfer the end of the pipe to prevent the ring seal being damaged or displaced when the pipe is inserted into the socket. Fittings with spigot ends are moulded with a chamfer during manufacture.3. Lubricate the spigot or ring seal with silicone grease or aerosol lubricant. 4. Insert the pipe or fitting into the socket and then withdraw it by approx. 10mm to allow for expansion of the pipework.

€1.60

Swept Tee 90deg

  • PUSH-FIT (Ring Seal) JOINTING 1. Where plain end pipe is being used, ensure that the pipe is cut square to it’s axis and that all burrs are removed. 2. Chamfer the end of the pipe to prevent the ring seal being damaged or displaced when the pipe is inserted into the socket. Fittings with spigot ends are moulded with a chamfer during manufacture.3. Lubricate the spigot or ring seal with silicone grease or aerosol lubricant. 4. Insert the pipe or fitting into the socket and then withdraw it by approx. 10mm to allow for expansion of the pipework.

€1.69

Swivel Bend 90deg

  • PUSH-FIT (Ring Seal) JOINTING 1. Where plain end pipe is being used, ensure that the pipe is cut square to it’s axis and that all burrs are removed. 2. Chamfer the end of the pipe to prevent the ring seal being damaged or displaced when the pipe is inserted into the socket. Fittings with spigot ends are moulded with a chamfer during manufacture.3. Lubricate the spigot or ring seal with silicone grease or aerosol lubricant. 4. Insert the pipe or fitting into the socket and then withdraw it by approx. 10mm to allow for expansion of the pipework.

€1.69

Tank Connector

  • PUSH-FIT (Ring Seal) JOINTING 1. Where plain end pipe is being used, ensure that the pipe is cut square to it’s axis and that all burrs are removed. 2. Chamfer the end of the pipe to prevent the ring seal being damaged or displaced when the pipe is inserted into the socket. Fittings with spigot ends are moulded with a chamfer during manufacture.3. Lubricate the spigot or ring seal with silicone grease or aerosol lubricant. 4. Insert the pipe or fitting into the socket and then withdraw it by approx. 10mm to allow for expansion of the pipework.

€1.84

Threaded Coupling (BSP Female)

  • PUSH-FIT (Ring Seal) JOINTING 1. Where plain end pipe is being used, ensure that the pipe is cut square to it’s axis and that all burrs are removed. 2. Chamfer the end of the pipe to prevent the ring seal being damaged or displaced when the pipe is inserted into the socket. Fittings with spigot ends are moulded with a chamfer during manufacture.3. Lubricate the spigot or ring seal with silicone grease or aerosol lubricant. 4. Insert the pipe or fitting into the socket and then withdraw it by approx. 10mm to allow for expansion of the pipework.

€1.96